Tag: session

1. Connect cable to WAN port and power on router

Download contents from: http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Frelease+candidates%2FDD-WRT+v24+RC7%2FAtheros+WiSoc%2FAirlink+101+AR430W/

2. Set your host IP to 192.168.20.80 (Don’t bother with any values in DNS Server/Alternate DNS)
3. ping -t 192.168.20.81
4. Run PuTTY/PuttyTel (YOU MUST USE PUTTY – SecureCRT and the regular Windows telnet DON’T WORK!) and set port to 9000 with Telnet option. – on the 2nd ping, hit open to connect to the router on 192.168.20.81. If you miss this, you may need to reset the router and try again.
You’ll see:
You’ll probably get these messages:
/releases/svn.porsche/redboot-ar231x/redboot-ar231x/redboot_cobra/ecos/packages/devs/eth/mips/ar531x/current/src/ae531xecos.c#390:ae531x_send AHB ERROR: AR531X_DEBUG_ERROR = 00000145
/releases/svn.porsche/redboot-ar231x/redboot-ar231x/redboot_cobra/ecos/packages/devs/eth/mips/ar531x/current/src/ae531xecos.c#393:ae531x_send AHB ERROR status_4 = 00000145

It’s safe to ignore them.

5. Started TtftpSrv in background.

In the screen, run:
load ap61.ram
go

6. change host IP to 192.168.1.23 and then change your command prompt window to run: “ping -t 192.168.1.1”

7. with putty, telnet to 192.168.1.1 9000
You’l see: DD-WRT>

Unfortunately, after this, it’s a little shaky as to what I did. If you do all of these steps in this order, it should work.

ip_address -l 192.168.1.1 -h 192.168.1.23
fconfig bootp false
bootp: Setting to false
Update RedBoot non-volatile configuration – continue (y/n)? y
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT> fis init
About to initialize [format] FLASH image system – continue (y/n)? y
*** Initialize FLASH Image System
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .

DD-WRT> ip_address -l 192.168.1.1 -h 192.168.1.23
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.23
DD-WRT> load -r -b %{FREEMEMLO} ap61.rom
Using default protocol (TFTP)
Raw file loaded 0x80080000-0x800a8717, assumed entry at 0x80080000

fis create -l 0x30000 -e 0xbfc00000 RedBoot
An image named ‘RedBoot’ exists – continue (y/n)? y
… Erase from 0xbfc00000-0xbfc30000: …
… Program from 0x80080000-0x800a8718 at 0xbfc00000: …
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x807f0000-0x80800000 at 0xbffe0000: .

reset

DD-WRT> fis init
About to initialize [format] FLASH image system – continue (y/n)? y
*** Initialize FLASH Image System
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .

fconfig boot_script true
boot_script: Setting to true
Update RedBoot non-volatile configuration – continue (y/n)? y
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT> fconfig boot_script_timeout 3
boot_script_timeout: Setting to 3
Update RedBoot non-volatile configuration – continue (y/n)? y
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT>

DD-WRT> load -v -r -b 0x80041000 linux.bin

You should see something like this:

|——————————————————————————-
Raw file loaded 0x80041000-0x803cefff, assumed entry at 0x80041000————–
DD-WRT> ———————————————————————-
——————————————————————————–
——————————————————————————–
——————————————————————————–
–

Then run:
fis create linux
This will take forever. This would probably be a good time to set your telnet session so that putty doesn’t timeout and die.

Here’s a screenshot:

DD-WRT> fis create linux——————————————————–
——————————————————————————–
——————————————————————————–
… Erase from 0xbfc30000-0xbffbe000: …………………………………………………
… Program from 0x80041000-0x803cf000 at 0xbfc30000: …………………………………………………
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT> DD-WRT> DD-WRT>

DD-WRT> fconfig
Run script at boot: true
Boot script:
Enter script, terminate with empty line
>> fis load -l linux
>> exec
>>
Boot script timeout (1000ms resolution): 3
Use BOOTP for network configuration: true
Default server IP address: 192.168.1.1
Console baud rate: 9600
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Update RedBoot non-volatile configuration – continue (y/n)? y
… Erase from 0xbffe0000-0xbfff0000: .
… Program from 0x80ff0000-0x81000000 at 0xbffe0000: .

Please reference: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=29779

and http://www.dd-wrt.com/phpBB2/viewtopic.php?t=23510&postdays=0&postorder=asc&start=240

and of course http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC7/Atheros%20WiSoc/Airlink%20101%20AR430W/flashing.txt

By the way, here’s the end result: