1) Create the Windows share on the Windows box.
2) Log into linux as root. Then type “smbclient -L
You’ll get some output like this:
# smbclient -L 10.16.8.210
added interface ip=10.16.80.1 bcast=10.16.95.255 nmask=255.255.240.0
Password:
Anonymous login successful
Domain=[OFFICE] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Sharename Type Comment
——— —- ——-
IPC$ IPC Remote IPC
print$ Disk Printer Drivers
shareddocs Disk
tmp Disk Temporary file space
3) With this, you’ll have the share names.
4) To mount, you can run:
mount -t smbfs -o username=nobody,password=”” //10.16.8.210/tmp /mnt
5) ls -l /mnt
You should see the files there.]]>
Tag: Linux
How to get USB devices to work in Linux or the ESX console
Here is how I’ve gotten a couple of cdroms / usb memory sticks / hard drives to work.
1) modprobe usb-ohci
Or
modprobe usb-uhci
(one of them should work, one may fail)
2) modprobe usb-storage
3) tail /var/log/messages
Or
dmesg
and you should see something like this:
Feb 8 14:50:56 supp15 kernel: Initializing USB Mass Storage driver…
Feb 8 14:50:56 supp15 kernel: usb.c: registered new driver usb-storage
Feb 8 14:50:56 supp15 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Feb 8 14:50:56 supp15 kernel: Vendor: SanDisk Model: Cruzer Mini Rev: 0.4
Feb 8 14:50:56 supp15 kernel: Type: Direct-Access ANSI SCSI revision: 02
Feb 8 14:50:56 supp15 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x1f 0x0
Feb 8 14:50:56 supp15 kernel: VMWARE SCSI Id: Could not get disk id for sdb
Feb 8 14:50:56 supp15 kernel: :VMWARE: Unique Device attached as scsi disk sdb at scsi1, channel 0, id 0, lun 0
Feb 8 14:50:56 supp15 kernel: Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
Feb 8 14:50:56 supp15 kernel: scsi_register_host starting finish
Feb 8 14:50:56 supp15 kernel: SCSI device sdb: 2001888 512-byte hdwr sectors (976 MB)
Feb 8 14:50:56 supp15 kernel: sdb: Write Protect is off
Feb 8 14:50:56 supp15 kernel: sdb: sdb1 Feb 8 14:50:56 supp15 kernel: scsi_register_host done with finish
Feb 8 14:50:56 supp15 kernel: USB Mass Storage support registered.
4) Now that we know that it’s sdb1,
Create the mountpoint directory:
mkdir /mnt/usb
Mount the device:
mount /dev/sdb1 /mnt/usb
That’s it. Your files should be in /mnt/usb. To check, just run ls /mnt/usb
In a case that you don’t have /dev/sdb1 there, which is what happened to me once with a Dell CDrom, I had to mknod the device.
After plugging the usb cdrom into the machine, /var/log/messages showed:
date hostname kernel: sr0: scsi3-mmc drive: 10x/10x cd/rw …..
Unfortunately, if you type: “mount /dev/sr0 /mnt/mountpoint”, it will say:
“mount: special device /dev/sr0 does not exist” and that doesn’t do us any good. So what I did after that was:
cd /dev
mknod sr0 b 11 0
With that, /dev/sr0 existed and hence I was able to run:
mount /dev/sr0 /mnt/mountpoint
or, I could run:
ln -s /dev/sr0 /dev/cdrom
and run:
mount /dev/cdrom /mnt/mountpoint
That’s it!